home *** CD-ROM | disk | FTP | other *** search
/ CD ROM Paradise Collection 4 / CD ROM Paradise Collection 4 1995 Nov.iso / system / fmlite10.zip / MANUAL.DOC < prev    next >
Text File  |  1995-03-01  |  87KB  |  2,113 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.                             ╔══════════════════════════╗
  23.                             ║   fastmenu LITE   (tm)   ║
  24.                             ╚══════════════════════════╝
  25.                                     Version 1.0a
  26.                                Copyright (C) 1994 by:
  27.  
  28.                                    jwh: SoftWare
  29.                                   6947 Haggerty Rd
  30.                                Hillsboro, Ohio   45133
  31.                                 Phone: (513)393-2402   
  32.  
  33.  
  34.  
  35.  
  36.  
  37.                                    Distributed By:
  38.  
  39.                                  Kathi J Hildenbrand
  40.                                     jwh:SoftWare
  41.                                   6947 Haggerty Rd
  42.                                Hillsboro, Ohio   45133   
  43.                                 Phone: (513)393-2402
  44.  
  45.  
  46.  
  47.  
  48.                                
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66. -
  67.  
  68.  
  69.  
  70.  
  71.  
  72.  
  73.  
  74.  
  75.  
  76.  
  77.  
  78.          Table of contents.                                        Page
  79.          ~~~~~~~~~~~~~~~~~~                                        ~~~~
  80.          Applications Main Menu.....................................  3
  81.          Edit Applications Module...................................  4
  82.          Setup/Configuration Module.................................  6
  83.          Setting up timed application/batch execution................ 6
  84.          Installation Instructions.................................. 10
  85.          Re-Assigning the Function Key Icons........................ 10
  86.          DOS/Disk Utility........................................... 10
  87.          Disk Utility File List Screen.............................. 13
  88.          Phone Book/Dialer Module................................... 17
  89.          Calendar/Notepad module.................................... 20
  90.          Entering multiple commands at the Command field............ 25
  91.          Executing batch files before & after screen blanking....... 25
  92.          Sorting Folder Titles or Applications Listed in a Folder... 25
  93.          The Tab Icon and how it works.............................. 27
  94.          Working with ZIP files..................................... 27
  95.          Executing applications from the Folder Titles page......... 28
  96.          Trouble Shooting........................................... 29
  97.          New Version and Update Policy.............................. 30
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.          NOTE !!!!!   IN ORDER FOR THIS PROGRAM TO OPERATE PROPERLY YOU
  106.                       MUST HAVE A PATH STATEMENT TO THE ROOT DIRECTORY,
  107.                       YOUR   DOS   DIRECTORY,  AND  THE  FASTMENU  LITE
  108.                       DIRECTORY.  THIS PATH STATEMENT SHOULD BE IN YOUR
  109.                       AUTOEXEC.BAT FILE.
  110.  
  111.                       EXAMPLE: PATH=C:\;C:\DOS;C:\FMLITE
  112.  
  113.  
  114.  
  115.  
  116.  
  117.  
  118.  
  119.  
  120.  
  121.  
  122.  
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.                                        Page 1
  130.  
  131.  
  132. -
  133.  
  134.  
  135.  
  136.  
  137.  
  138.          QUICK INSTALLATION AND STARTUP.
  139.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  140.          1>- Make a backup copy of your original disk.
  141.  
  142.          2>- Insert your backup disk into any drive.
  143.  
  144.          3>- Move to that drive and type: INSTALL
  145.  
  146.          4>- Follow onscreen instructions to complete the installation.
  147.  
  148.          5>- Make sure you have a  PATH statement  in your AUTOEXEC.BAT
  149.              to your ROOT,DOS, and FMLITE directorys.
  150.  
  151.          6>- After installation, type 'LITE' to start fastmenu LITE.
  152.  
  153.          7>- Add 'LITE' as the last line in your  AUTOEXEC.BAT  file if
  154.              you want  fastmenu LITE  to automatically  start when  you
  155.              turn your computer on.
  156.  
  157.          ADDING A APPLICATION.
  158.          ~~~~~~~~~~~~~~~~~~~~~
  159.          1>- After you have gotten fastmenu LITE up and running, at the
  160.              main menu screen you will  see a window with  twenty lines
  161.              lettered A to T.  The letters on these lines will be blue.
  162.              These lines represent the folder titles. Before adding any
  163.              applications you must first  create a folder  (some sample
  164.              folders may already have been created for you) and give it
  165.              a title. To create folder #1, simply press the 'A' key and
  166.              at  this point  you will  be given a  place to  enter  the
  167.              folder title and then press the enter key.
  168.  
  169.          2>- After entering the title for folder A,  you will be  taken
  170.              to a blank folder A. At this time  you will  also see  two
  171.              new prompts, Title (<) and Z=Edit.  At this point we  want 
  172.              to add  a application  to  this folder,  so choose  option
  173.              Z=Edit.   NOTE !  Also at this point you may just click on
  174.              a blank folder  line to  go  straight  to the  application 
  175.              editor screen.
  176.  
  177.          3>- After  selecting the  Z=Edit option, you will be  taken to 
  178.              the  applications editor.  To Add an application, from the  
  179.              opening  menu,  select  the  Add/Edit  option by  choosing 
  180.              option 'A'.
  181.  
  182.          4>- After  selecting the Add/Edit option, an Applications List
  183.              window will  be displayed.  We will  Add an application to
  184.              line A, so move the highlight bar to line A, press enter.
  185.  
  186.          5>- After selecting line A,  you will be presented with a data
  187.              entry screen to fill out.  At the first field,  enter  the
  188.              title or name of the application that you want  to execute
  189.              with this line.
  190.  
  191.  
  192.  
  193.  
  194.  
  195.                                        Page 2
  196.  
  197.  
  198. -
  199.  
  200.  
  201.  
  202.  
  203.          6>- At the Drive field,  press  the PgDn  key and  select  the
  204.              drive  that this  application resides on. At the directory
  205.              field,  press the  PgDn key  and select the directory that
  206.              this application resides in. At Command  field, press PgDn
  207.              and select the file that runs this application.
  208.  
  209.          7>- If you want this application  password protected,  enter a
  210.              'Y' at the Password field.  If you are running DOS Version
  211.              3.3 or later, answer the Fast Run field with a 'Y'. If you
  212.              want  fastmenu LITE  to pause before execution and ask you
  213.              for command line parameters, answer the Command Line Parms
  214.              field with a 'Y'.  NOTE !  If you answer this field with a
  215.              'Y' then you must also  include a (+)  plus sign  directly
  216.              after the run filename at the Command Field.
  217.  
  218.          8>- At this time you will be presented with  two more  fields.
  219.              if you enter any information in these fields,  it will  be
  220.              displayed at application execution or exit.  If you do not
  221.              want  any  prompt  displayed, simply  leave  these  fields
  222.              blank. When you are finished with these two fields,  press
  223.              the Esc key to exit the edit mode.
  224.  
  225.          9>- At this  time  you  may save  this entry  by pressing  the
  226.              ESC key  and then press the (Y) key to save this entry. If
  227.              you  have  selected to  password  this entry  you will  be
  228.              asked to enter the password at this time.
  229.  
  230.          fastmenu LITE Applications Main Menu.
  231.          ====================================:>
  232.  
  233.          Option                  Reaction to option
  234.          ~~~~~~                  ~~~~~~~~~~~~~~~~~~
  235.          Esc .............. Selecting this option will exit you to DOS.
  236.  
  237.               NOTE !  If you want, you may have fastmenu LITE execute a
  238.                       batch  file or application upon  exit by clicking
  239.                       your  right mouse button (or CTRL+Esc) on the Esc
  240.                       button and filling out the path information.
  241.  
  242.          Y=Setup........... This option  should be  used the very first
  243.                             time you use fastmenu LITE.
  244.  
  245.               Here  you will  set the program parameters that will make
  246.               fastmenu LITE work properly.  This option may be accessed
  247.               by  pressing the  letter 'Y'  or by pointing the mouse at
  248.               the prompt icon and then pressing the left mouse button.
  249.  
  250.          F1 through F10..... Used as hot keys to Applications.
  251.  
  252.               You can assign  applications to  these icons by  clicking
  253.               your mouse on a blank  line or selecting the function key
  254.               with your keyboard.   You can change a function  key icon
  255.               at  any time  by clicking your right mouse  button on the 
  256.               icon or pressing (Ctrl+ Function key).
  257.  
  258.          Up-Dn Arrow....... Pressing  the up  or  down arrow  keys will
  259.                             page through the Folder Titles or Folders.
  260.  
  261.                                        Page 3
  262.  
  263.  
  264. -
  265.  
  266.  
  267.  
  268.  
  269.          =................. Pressing this icon will give you the option 
  270.                             of sorting  either the  Folder list  or the 
  271.                             applications within a folder.
  272.  
  273.          *................. Pressing  this Icon will toggle between the
  274.                             3D or flat fonts.
  275.  
  276.          ?................. Press  this  Icon  to  display registration
  277.                             information.
  278.  
  279.          Tab............... Pressing this Icon will force fastmenu LITE
  280.                             into screen blanking.
  281.  
  282.          fastmenu LITE Edit Applications Module.
  283.          ======================================:>
  284.  
  285.          Option             Reaction to option
  286.          ~~~~~~             ~~~~~~~~~~~~~~~~~~
  287.          ESC=Exit.......... Using  this option  will return you back to
  288.                             fastmenu LITE main menu.
  289.  
  290.          Add/Edit.......... This  option  allows you  to add  or change
  291.                             programs or applications on this folder.
  292.  
  293.          Any application that can run in DOS can be started or executed
  294.          with fastmenu LITE,  either through the  applications  menu or
  295.          through the (S)tart option from the file list menu.
  296.  
  297.          Adding a new application.
  298.          ~~~~~~~~~~~~~~~~~~~~~~~~~
  299.            1>- Choose option Add/Edit from  the edit  applications menu
  300.                prompt  list then  from the applications list select the
  301.                application  or the line  that you want to Add/edit. You
  302.                will be presented with seven questions to answer.
  303.  
  304.            2>- The  first question  will be asking you for the title or
  305.                name of the program that you want to run.  This title or
  306.                name can be anything you want it to be, and is only used
  307.                as a reference.
  308.  
  309.            3>- The second  question will  be asking you for the name or
  310.                letter of the drive that  this program  will be  running
  311.                from.  Examples would be: A, B or C.  Pressing  the PgDn
  312.                key will list all available drives on your system.
  313.  
  314.            4>- The third  question will  be asking  you for the name of
  315.                the directory that this  program is in.  Always separate
  316.                multiple  directory  entries   with  a  backslash   (\).
  317.                Press the PgDn key to list all available  directories on
  318.                your system.
  319.  
  320.                NOTE ! If you are running this new program from a floppy
  321.                       and/or the program is in the root directory, just
  322.                       press <enter> at this prompt.
  323.  
  324.            
  325.            
  326.            
  327.                                        Page 4
  328.            
  329.            
  330. -           
  331.            
  332.            
  333.            
  334.            
  335.            5>- The fourth  question will  be asking you for the name of
  336.                the  file that  you normally  have to type in to run the
  337.                program  (The executable file).  You may  also enter any
  338.                command  line switches  or parameters  here.  This  is a
  339.                scrollable edit field that allows  entering  up  to  255
  340.                characters.
  341.  
  342.                NOTE !  Multiple  commands may be entered at this field.
  343.                        This is explained further, later in this manual.
  344.                
  345.                ALSO    This  file will  normally have an extension name
  346.                        of either .EXE, .COM, or .BAT.    ALWAYS include
  347.                        this file extension at the Command Field.
  348.  
  349.            6>- The  fifth  question  will  be  asking  if  you want  to
  350.                password  protect  this  program.   If you  do not  want
  351.                password protection,  just answer  this question  with a
  352.                'N'. If you want password protection  for this  program,
  353.                answer this question with a 'Y'.
  354.  
  355.            7>- The sixth question will be asking if you want to use the
  356.                Fast  Load method  of launching  this application.  This
  357.                method  is recommended, but may cause some problems with
  358.                early versions of DOS.
  359.  
  360.            8>- The seventh question will be asking if you want fastmenu
  361.                LITE  to pause  before execution  of this application so
  362.                you may enter a variable DOS command line parameter.
  363.  
  364.            9>- At this time you will be presented with two more fields.
  365.                if  you enter  any information in either of these fields
  366.                it  will be  displayed  with a pause  during application
  367.                execution  or  exit.  If  you  do  not  want any  prompt
  368.                displayed, simply leave the fields blank.
  369.  
  370.            After completing these fields, sinply press the Esc key and
  371.            then select the 'Y' to save it.
  372.  
  373.            11>- At  this time,  if you  chose to  password protect this
  374.                 program,  you will  be  given  a  place  to  enter  the
  375.                 password  that you  want to use to access this program.
  376.                 You are allowed up to  20 characters or numbers in this
  377.                 password.  After entering  this password,  you will  be
  378.                 prompted to verify it's validity.
  379.  
  380.            CAUTION !!!   Be sure  to remember this password,  it cannot
  381.                          be  removed from  a program listing unless you
  382.                          know  the password.  This password  is totally
  383.                          scrambled  before it  is written  to file  and
  384.                          would be very hard to unscramble.
  385.  
  386.          Delete App's...... This option is used to delete or  remove an
  387.                             existing application.
  388.  
  389.          
  390.          
  391.          
  392.          
  393.                                        Page 5
  394.          
  395.          
  396. -         
  397.          
  398.          
  399.          
  400.          
  401.          Deleting a listing.
  402.          ~~~~~~~~~~~~~~~~~~~
  403.            1>- Choose option Delete application from the menu list.
  404.  
  405.            2>- After choosing  this option,  all applications listed on
  406.                this page will be listed to screen.  Select the one that
  407.                you want to delete with the highlight bar and then press
  408.                enter.  You will be asked to verify your delete
  409.  
  410.          Edit Title........ This option  will  allow you  to change the
  411.                             Title or Name that is  presently being used
  412.                             used for this page.
  413.  
  414.          Delete This Folder.. Choose this option if you want  to delete
  415.                               this page from the menu.
  416.  
  417.          Update Directory Tree.. This option  will update the directory
  418.                                  tree  list that you see when you press
  419.                                  the PgDn key to list the directories.
  420.  
  421.          Password Protection
  422.          for this Folder...... Selecting  this option will give you the
  423.                                option for entering or removing password
  424.                                protection for this entire Folder.
  425.  
  426.  
  427.          fastmenu LITE Setup Module.
  428.          ==========================:>
  429.  
  430.          Option             Reaction to option
  431.          ~~~~~~             ~~~~~~~~~~~~~~~~~~
  432.          ESC=Quit.......... This option will return you to the fastmenu
  433.                             applications menu.
  434.  
  435.          A >- Automatic Execution At Startup
  436.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  437.          Selecting this  option  will provide  you with a  input screen
  438.          that you may type in the Title, Drive, Directory, and Run File
  439.          of the application you want executed at fastmenu LITE startup.  
  440.          If you  setup  an  application  at  this  screen,  it  will be 
  441.          executed at  startup and  after executing this application you 
  442.          will be returned to fastmenu LITE.
  443.              
  444.          B >- Add/Edit/Delete Timed Event Execution
  445.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  446.          Selecting  this option  will take you to  a menu where you may
  447.          select any timed event to create or edit from A to J (10).  If
  448.          you want to setup a new timed event,  just select a blank line
  449.          and  you will  be asked  to give a description for this event.
  450.          After entering  the description,  you will see  it listed as a
  451.          selection,  just select it and you  will be taken to the timed
  452.          event editor.
  453.  
  454.          Selecting this option  will open a window with data fields for
  455.          you to  fill in.  At the first field,  enter the time in 12 hr
  456.          format (civilian time)  that you want the application or batch
  457.          file executed.
  458.  
  459.                                        Page 6
  460.  
  461.  
  462. -
  463.  
  464.  
  465.  
  466.  
  467.          NOTE !   From midnight to 12:59 afternoon is considered AM and
  468.                   from 1:00 afternoon to 11:59 afternoon is considered
  469.                   PM.
  470.  
  471.          At  the  Date  field   enter  the  date  that  you  want  this
  472.          application or batch file to be executed.
  473.  
  474.          NOTE !  If you want  this  execution  to be on a  daily basis,
  475.                  leave this  Date field  completely blank.  Then answer
  476.                  the Yes/No  weekday prompts  to tell fastmenu  on what
  477.                  days you want this application/batch file to be run.
  478.  
  479.          At the remaining three fields,  enter the Drive, Path, and the
  480.          name of  the executable  file.  After completing  all  fields,
  481.          press the Esc key to exit then press the 'S' key to save them.
  482.  
  483.          C >- Add/Edit/Delete System Module Passwords
  484.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  485.              A >- fastmenu LITE Startup
  486.                ~~~~~~~~~~~~~~~~~~~~~~~~
  487.              Use  this  option  if you  want to  create a password  for 
  488.              startup of fastmenu LITE.
  489.              
  490.              B >- Password Protect (Esc) Exit To DOS
  491.                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  492.              Use this  option to  setup whether  or not a user may exit
  493.              fastmenu LITE and go to DOS with or without a password.
  494.  
  495.              C >- Password Protect The Setup Module
  496.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  497.              Use this  option to  setup whether or not a user may enter
  498.              the Setup module with or without a password.
  499.  
  500.              D >- Password Protect The Edit Applications Module
  501.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  502.              Use this  option to  setup whether or not a user may enter
  503.              the Z=Edit Module with or without a password.
  504.  
  505.              E >- Password Protect The Calendar/NotePad Module
  506.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  507.              Use this  option to  setup whether or not a user may enter
  508.              Calendar/NotePad Module with or without a password.
  509.              
  510.              F >- Password Protect The PhoneBook/Dialer Module
  511.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  512.              Use this  option to  setup whether or not a user may enter
  513.              PhoneBook/Dialer Module with or without a password.
  514.              
  515.              G >- Password Protect The DOS/Disk Utility Module
  516.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  517.              Use this  option to  setup whether or not a user may enter
  518.              DOS/Disk Utility Module with or without a password.
  519.              
  520.              
  521.              
  522.              
  523.              
  524.              
  525.                                        Page 7
  526.              
  527.              
  528. -             
  529.              
  530.  
  531.  
  532.              
  533.              H >- Password Protect Edit Function Keys & Esc
  534.              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  535.              Use  this  option  to  setup  whether or  not a  user  may
  536.              re-assign  the function key icons or the Esc icon  with or 
  537.              without  using a password.
  538.  
  539.          D >- Update Directory Tree at Startup
  540.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541.          If you  answer this  option with  a 'N',  fastmenu  LITE  will
  542.          startup much  faster, skipping the opening screen and updating
  543.          the  directory  tree  files.  You  will  need  to  update  the
  544.          directory tree files  manually if any directory maintenance is
  545.          done outside the fastmenu LITE environment.
  546.  
  547.          E >- Toggle Screen Blanking Option On/Off
  548.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  549.          Use  this option to select whether you want screen blanking or
  550.          not. This option  will present you  with one question that can
  551.          be answered  by either a 'Y' if you want  screen blanking.
  552.  
  553.          NOTE !  This  screen  blanking only  has an effect on fastmenu
  554.                  LITE's main  menu screen  and will  not interrupt your
  555.                  applications in  any way.  During screen  blanking,  a
  556.                  logo  will dance  around on  your screen,  letting you
  557.                  know that fastmenu LITE is  ready to go at any time by
  558.                  pressing any key on your keyboard or moving the mouse.
  559.  
  560.                  If you have chosen  to use the screen blanking option,
  561.                  you will  then be  asked to enter  the amount  of time
  562.                  (seconds)  that fastmenu LITE  waits before going into
  563.                  screen blanking. The time can be any number of seconds
  564.                  between 1 and 999.
  565.  
  566.          F >- Setup Opening Screen Mode
  567.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  568.          fastmenu LITE will run in either of two screen modes.
  569.  
  570.          Mode 1 >- In this  mode fastmenu LITE  will display  the  page
  571.                    titles on the first screen, at startup.
  572.  
  573.          Mode 2 >- In this mode fastmenu LITE will  display any  of the
  574.                    application folders on the first screen, at startup.
  575.                    You may select the folder that is first displayed.
  576.  
  577.          When you select option 'F' from this  setup menu,  you will be
  578.          asked if you  want the folder  titles displayed first.  If you
  579.          answer this prompt with a 'N',  then you will also be asked to
  580.          enter the  folder  title  number that  you want  displayed  at
  581.          startup. You may enter any folder number between 1 and 80.
  582.              
  583.          
  584.          
  585.          
  586.          
  587.          
  588.          
  589.          
  590.          
  591.                                        Page 8
  592.          
  593.          
  594. -         
  595.          
  596.          
  597.  
  598.  
  599.          G >- Edit User Logo File
  600.          ~~~~~~~~~~~~~~~~~~~~~~~~
  601.          Use this option to edit or change the LOGO.DAT file. This file
  602.          contains the information that you will see moving about during 
  603.          screen blanking.  Also the information  in this file is listed 
  604.          to screen  on the main menu.  After choosing  this option  you 
  605.          will be presented with a screen that has this file listed in a 
  606.          small  editing window.  You may  make any changes you want  to 
  607.          this file and  then press the Tab key  to save it or press the
  608.          ESC key to exit.
  609.  
  610.          H >- Display Logo At Screen Blanking (ON/OFF)
  611.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  612.          Selecting this  option will give you the option of  turning on 
  613.          or of the display of the logo during screen blanking.
  614.  
  615.          I >- Folder/Applications Sort Option (ON/OFF)
  616.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  617.          Selecting this option will give  you the option of  turning on
  618.          or off the ability to sort the folders  or applications listed 
  619.          in a folder from the main menu screen.
  620.  
  621.          J >- Select System Fonts
  622.          ~~~~~~~~~~~~~~~~~~~~~~~~
  623.          Selecting this  option will allow  you to select the font type    
  624.          to be used throughout the program.
  625.  
  626.          K >- Select Font Color
  627.          ~~~~~~~~~~~~~~~~~~~~~~
  628.          Selecting this  option will allow you to select the font Color    
  629.          to be used throughout the program.
  630.  
  631.          L >- Select Background Color
  632.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  633.          Selecting this  option will  allow you  to select  the  screen    
  634.          background color to be used throughout the program.
  635.  
  636.          M >- Default Path      (Phonebook/Dialer)
  637.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  638.          Selecting this option will allow you to set a default path for
  639.          the Phonebook/Dialer to use for saving and loading files from.
  640.  
  641.          N >- Default Path      (Calendar/Notepad)
  642.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  643.          Selecting this option will allow you to set a default path for
  644.          the Calendar/Notepad to use for saving and loading files from.
  645.              
  646.          O >- Setup Modem & Printer Parameters
  647.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  648.          Selecting this option will allow you to set the default  Parms
  649.          for the modem to use during dialing  phone numbers and also to
  650.          set up your printer port and page lines.
  651.              
  652.  
  653.  
  654.  
  655.  
  656.  
  657.                                        Page 9
  658.  
  659.  
  660. -
  661.  
  662.  
  663.  
  664.  
  665.          fastmenu LITE installation instructions.
  666.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  667.          NOTE !  Before you install  fastmenu LITE I strongly recommend
  668.                  that  you make  backup  copies of  your original disk.
  669.  
  670.                  Consult  your DOS  manual on  making backup  copies or
  671.                  using DISKCOPY on your machine.
  672.  
  673.          fastmenu LITE is not  a complicated  program to setup and does
  674.          not require a lot of work to get running.  The following three
  675.          steps is all that is needed to insure proper operation.
  676.  
  677.          1>- Insert  your fastmenu  backup/distribution  disk into  any
  678.              drive, move to that drive and type: INSTALL <enter>.
  679.  
  680.              Follow on-screen instructions to install fastmenu LITE.
  681.  
  682.          2>- Make sure your AUTOEXEC.BAT file contains a path statement
  683.              to the ROOT,  DOS,  and FMLITE  directories  on your  hard 
  684.              drive.
  685.  
  686.              Example of the path statement:  PATH=C:\;C:\DOS;C:\FMLITE
  687.  
  688.          3>- If you want fastmenu LITE to startup automatically, add to
  689.              the end of your AUTOEXEC.BAT file the following line: LITE
  690.  
  691.                         NOTE !  This line must be the last line in your
  692.                                 AUTOEXEC.BAT file.
  693.  
  694.          This should complete the setup procedure for fastmenu LITE.
  695.  
  696.          Assigning applications to the function key prompts.
  697.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  698.          To assign a  application to  one of the  function key prompts,
  699.          simply press the Ctrl  key plus the corresponding function key
  700.          down  or click  the right  mouse button  on the  function  key
  701.          prompt.  Complete the displayed path information and then save
  702.          it by pressing the 'S' key.
  703.  
  704.  
  705.          DOS/Disk Utility Module.
  706.          =======================:>
  707.  
  708.          Option             Reaction to option
  709.          ~~~~~~             ~~~~~~~~~~~~~~~~~~
  710.          Format Diskettes.. Use this option to format  new diskettes or
  711.                             floppies.
  712.  
  713.            NOTE !  For reasons of compatibility between computers, this
  714.                    program  uses the  standard DOS format program found
  715.                    in your  DOS directory.  For proper operation,  your
  716.                    AUTOEXEC.BAT  file must contain the path to your DOS
  717.                    files.
  718.  
  719.            
  720.            
  721.            
  722.            
  723.                                        Page 10
  724.            
  725.            
  726. -           
  727.            
  728.            
  729.            
  730.  
  731.            Formatting diskettes.
  732.            ~~~~~~~~~~~~~~~~~~~~
  733.              1>- After  choosing the Format Diskettes you will be asked 
  734.                  to choose the drive that you want to format from.
  735.  
  736.              1>- After  choosing the Drive, you will be asked to choose 
  737.                  whether  you want to  format a Non Systems Disk or DOS 
  738.                  Systems  Disk (Boot Disk).  If you choose  to format a 
  739.                  systems disk, after  the format process, the necessary 
  740.                  DOS files  will be copied to it,  creating a  bootable 
  741.                  DOS diskette.
  742.  
  743.              3>- After choosing the format type you will need to select
  744.                  the disk density or size you the disk formatted to.
  745.  
  746.              4>- After  choosing the  format density you  will be asked
  747.                  to insert  a disk in  the chosen  drive and  press any
  748.                  key to begin formatting.
  749.  
  750.          Single Pass DiskCopy. Use this option to copy a floppy disk in
  751.                                one pass  without the  need of switching
  752.                                disks back  and forth during the copy of
  753.                                high density disks.
  754.  
  755.                 NOTE !   This copy process copies  files along with any
  756.                 directories that  may be on the  source disk to  a work
  757.                 disk you  select.  After this  it will then  prompt you
  758.                 to  insert a destination disk  to place these files and
  759.                 directories  on.  After the  destination disk  has been
  760.                 completed, you may select to make additional copies.
  761.  
  762.                 ALSO !  This copy routine does not copy a disk byte for
  763.                 byte,  but instead,  copies  the files  and directories
  764.                 byte for byte.    With this in mind,  remember,  due to
  765.                 the fact that the original disk may have had it's files
  766.                 scattered  over partial  clusters of the original disk,
  767.                 the new copy will be placed on contingent clusters on a
  768.                 clean  disk  and  may use  up less  disk space.  A Disk
  769.                 compare may show a difference.  If you  think you  need
  770.                 to make  a compare  of  the  disks,  always use  a file
  771.                 compare instead of a disk compare.
  772.  
  773.          File Maintenance..... Use this  option if  you want to perform
  774.                                any  of  the  following:  Copy,  Delete,
  775.                                Rename, View, Edit, or Start files.  You
  776.                                may also do directory  maintenance  from
  777.                                this  option.    The  ZIP-Menu  is  also
  778.                                accessed through this option.
  779.  
  780.            1>- After choosing this option,  you will be asked to choose
  781.                the drive that you want to perform file maintenance on.
  782.  
  783.  
  784.  
  785.  
  786.  
  787.  
  788.  
  789.                                        Page 11
  790.  
  791.  
  792. -
  793.  
  794.  
  795.  
  796.  
  797.            2>- After  choosing the drive,  fastmenu LITE will check the
  798.                drive  to see  if it  has any  directories.  Select  the
  799.                directory  you want  and then press enter.  At this time
  800.                you  will be presented with the file list that was found
  801.                on this drive.  Choosing a directory is  done by  moving  
  802.                the highlight bar to the directory you want with  the Up 
  803.                and Down arrow keys and then pressing the enter key.
  804.  
  805.                ALSO !   While at  the directory  list screen,  you also
  806.                have  options  to  Create,  Re-Name,  Delete,   or Print
  807.                directories.
  808.  
  809.          Creating a new Directory from the Directory Tree screen.
  810.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  811.          After choosing the File Maintenance option,  you will be asked
  812.          to choose the drive that you want to work with. After choosing 
  813.          the  drive you  will be  taken to the  directory tree  screen.  
  814.          From the  directory  tree screen,  you will move the highlight 
  815.          bar to  the location that you want this new directory  placed. 
  816.          You can do  this by moving  the highlight  bar up or down  the 
  817.          directory tree and then pressing enter.
  818.  
  819.            NOTE ! To place a new directory from the root directory, you
  820.                   will  want  to  highlight  the  ROOT  option  on  the
  821.                   directory  tree list.   If you  want to  place a  new
  822.                   subdirectory  off from  an existing  directory,  just
  823.                   highlight that directory.
  824.  
  825.               After choosing the directory location, press the 'C' key,
  826.               enter the name of the new directory and then press enter.
  827.  
  828.          Deleting Existing Directories from the Directory Tree Screen.
  829.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  830.          This option  can be  reached from the  Directory Tree  Screen,
  831.          after choosing the File Maintenance  option from the  DOS/Disk
  832.          Utility Menu and the drive from the Drive Menu.
  833.  
  834.            NOTE !  A directory cannot be deleted without first deleting
  835.                    any files it may contain.
  836.  
  837.          Choose the  directory that  you want  to delete  by moving the
  838.          highlight  bar to  that directory  then press the 'D' key. You
  839.          will be asked to verify your choice.
  840.  
  841.          Renaming Existing Directories from the Directory Tree Screen.
  842.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  843.          Select  the directory  that you  want to  rename by moving the
  844.          highlight  bar to  that directory  and then press the 'R' key.
  845.          You  will be  presented with  the directory name  in an editor
  846.          field, simply edit the existing name and then press enter.
  847.          
  848.          Printing the Directory list to your printer.
  849.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  850.          From the directory tree screen,  you may choose to send a copy
  851.          of this directory tree information to your printer by pressing
  852.          the 'P' key.
  853.  
  854.          
  855.                                        Page 12
  856.          
  857.          
  858. -         
  859.          
  860.          
  861.          
  862.  
  863.          Sorting the directory tree screen.
  864.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  865.          Selecting the Sort option from the directory tree  screen will
  866.          present  you with  a  scrolling  menu  that  allows  selecting 
  867.          whether you want the directory list sorted or not.  
  868.          
  869.          NOTE !  Sorting this directory tree list  does not  change how
  870.                  your directories are actually list on disk.
  871.  
  872.          Update Directory File. Using this option  will manually update
  873.                                 the directory tree mirror files.
  874.  
  875.            NOTE !  fastmenu LITE automatically  updates  the  directory
  876.                    tree files if any directory maintenance is done with
  877.                    the utility module.
  878.  
  879.                    If you select not to have  fastmenu LITE  update the
  880.                    the directory tree  files at startup  from the Setup
  881.                    module  and you  perform any  directory  maintenance
  882.                    outside of the  fastmenu LITE  environment,  you may
  883.                    need to use this option to update the directory tree
  884.                    files manually.
  885.  
  886.          
  887.          Set Mouse Sensitivity
  888.          ~~~~~~~~~~~~~~~~~~~~~
  889.          This  option will  allow  you  to adjust  the  sensitivity  or
  890.          movement ratio of your mouse.
  891.  
  892.          Set Keyboard Sensitivity & Delay rate
  893.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  894.          This option  provides a  way to  adjust the  speed  of  cursor
  895.          movement  and the  amount of  time before  continious movement
  896.          from holding a cursor keys down.
  897.          
  898.          Display System Drive Sizes and Free Space
  899.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  900.          Selecting this option will display  a screen with  all system
  901.          drives listed along with there sizes and free space remaining.
  902.          
  903.          fastmenu LITE Disk Utilities File List.
  904.          ======================================:>
  905.  
  906.          Option             Reaction to option
  907.          ~~~~~~             ~~~~~~~~~~~~~~~~~~
  908.          (ESC)............. Using this  option will  return you  to the
  909.                             previous menu.
  910.          
  911.          At the  upper right  corner of  your screen,   just above  the
  912.          option buttons,   you will see a gray button, this button will
  913.          display the disk volume label of the disk you are listing. You
  914.          may edit the  disk volume  label by  clicking your  left mouse
  915.          button  on this  button or  by pressing  the "L"  key on  your
  916.          keyboard.
  917.          
  918.          
  919.          
  920.          
  921.                                        Page 13
  922.          
  923.          
  924. -         
  925.          
  926.          
  927.          
  928.          
  929.          (F)ile Sort....... Selecting this option will present you with
  930.                             a scrolling menu with options to select how
  931.                             you want the file list sorted. You may sort
  932.                             by filename, file extension, file size,  or
  933.                             file date.  After selecting the sort field,
  934.                             you will then be asked how to sort,  either
  935.                             by ascending or descending order.
  936.  
  937.          (Up/Dn)........... Use these options to move the highlight bar
  938.                             up and down the file list.
  939.  
  940.          One key press will move the highlight bar up or down one file.
  941.          Holding  the key  down will  fast advance  the  highlight  bar
  942.          until you  release  the key or  the end  of the  file  list is
  943.          reached.
  944.  
  945.          (Home/End)........ Pressing  the  End  key  will  advance  the
  946.                             highlight bar to the end of the  file list.
  947.                             Pressing   the  Home  key  will  move   the
  948.                             highlight bar to the beginning of the list.
  949.                                        
  950.          (-/+/enter)....... Use these  options to  Tag  all  files  for
  951.                             later maintenance.  An asterisk will appear
  952.                             to the left  of the file name of every file
  953.                             that has been tagged.
  954.  
  955.          Tagging and Un-Tagging Files.
  956.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  957.          1>- Move the highlight  bar to the  file you  want to tag  and
  958.              then  press the  enter key.  If this file has already been
  959.              tagged it will be un-tagged. After using the  enter key to
  960.              tag  or un-tag  a file,  the highlight bar will advance to
  961.              the next file in the file list.
  962.  
  963.          2>- Pressing the plus key will tag all files in the file list.
  964.  
  965.          3>- Pressing the  minus key  will un-tag  all tagged  files in
  966.              the file list.
  967.  
  968.          (Q)uery........... Use this option to query the file list. DOS
  969.                             wild cards are valid here.
  970.  
  971.            NOTE !  The main  purpose for  including this  option was to
  972.                    give  you a  convenient way  of copying  or deleting
  973.                    certain  groups of files.  For example if you wanted
  974.                    to copy all the files  with the .DAT  extension, you
  975.                    would  first query the file list by entering [*.DAT]
  976.                    at the File Spec.  prompt. Then tag  all these files
  977.                    by pressing  the plus key,  then choose  the  (C)opy
  978.                    option to copy all tagged files.
  979.          
  980.          Querying the file list with (Q)uery option.
  981.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  982.          1>- After  choosing this option,  you will be given a place to
  983.              enter your query instructions and then press enter.  After
  984.              which the file list will again be presented  with only the
  985.              files that meet your query instructions listed.
  986.  
  987.                                        Page 14
  988.  
  989.  
  990. -
  991.  
  992.  
  993.  
  994.  
  995.               Query Examples:
  996.               ~~~~~~~~~~~~~~~
  997.               [*.*]....... This query would list all files.
  998.  
  999.               [*.EXE]..... This  query would  list files  with  the EXE
  1000.                            extension.
  1001.  
  1002.          (U)pdate.......... Use  this option  to update  or re-list the
  1003.                             files from the present drive or directory.
  1004.  
  1005.            NOTE !  You may change a disk while you are at the file list
  1006.                    screen. After changing to the new disk, just use the
  1007.                    (U)pdate option  to list  the files  from  the newly
  1008.                    inserted disk.
  1009.  
  1010.          (S)tart........... Use this option to run applications outside
  1011.                             fastmenu LITE.
  1012.  
  1013.          This  option was  added  to  give you  a way  to test  run  an
  1014.          application  or  to  run  applications or  games  from  floppy
  1015.          drives. Any program, game or application that  can be run from
  1016.          the DOS prompt can also be run through this option.
  1017.  
  1018.            NOTE ! This option will only accept files with the extension
  1019.                   of .EXE, .COM or .BAT. Before you can use this option
  1020.                   option, you must first tag  the file that you want to
  1021.                   run. After tagging this file, just choose the (S)tart
  1022.                   option to run it.
  1023.  
  1024.            ALSO !  When  executing  files through this option, fastmenu
  1025.            LITE does not drop totally out of memory. With this in mind,
  1026.            you may occasionally execute a file that  needs more  memory
  1027.            than is left over.   If this happens,  you will be prompted,
  1028.            Not enough memory.
  1029.  
  1030.          (V)iew............ Use this option to read or view text files.
  1031.  
  1032.          Before you can use  this option,  you must first tag  the file
  1033.          that you  want to read or view.  After tagging  this file just
  1034.          choose option (V)iew to view it.
  1035.  
  1036.          (E)dit............ Use this option to edit or create any ASCII
  1037.                             text file.
  1038.  
  1039.          To edit an existing  file you must first tag  it from the file
  1040.          list menu.  After tagging it,  just choose option  (E)dit from
  1041.          the file list menu.
  1042.  
  1043.          To create  a new  file,  just  choose  option  (E)dit  without
  1044.          tagging any files.    After editing the file and pressing Esc, 
  1045.          you will be asked to enter the name for the new file.  You may 
  1046.          use  any  DOS legal  name except names that have extensions of 
  1047.          .EXE or .COM.
  1048.            
  1049.            
  1050.            
  1051.            
  1052.            
  1053.                                        Page 15
  1054.            
  1055.            
  1056. -           
  1057.            
  1058.            
  1059.            
  1060.  
  1061.            NOTE !  This editor has the ability to edit files with lines
  1062.                    up to 255  characters long. When you first enter the
  1063.                    editor,  the right margin will be set to 255. If you
  1064.                    are  editing a  80 column  document you  may want to
  1065.                    reset the right margin before you begin.
  1066.  
  1067.          (C)opy/(M)ove..... Use this  option to copy or move  a file or  
  1068.                             group of files  from one directory or  disk  
  1069.                             to another directory or disk.
  1070.  
  1071.          Before using  this  option,  you must  first  tag  the file or
  1072.          group of files you want to copy or move, using the (Up/Dn) and  
  1073.          (-/+/enter) keys.
  1074.  
  1075.          1>- After  tagging  the files  you  want to  copy or move just 
  1076.              choose option (C)opy or (M)ove to start the process.
  1077.  
  1078.          2>- You  will be  asked to choose  the Target Drive (the drive
  1079.              that you want to copy these files to).  After choosing the
  1080.              Target Drive, fastmenu LITE will check that  drive for any
  1081.              existing directories.
  1082.  
  1083.          3>- If any directories are found, you will be  asked to choose
  1084.              which directory you want to copy these files to.
  1085.  
  1086.              NOTE !  If you have marked more files than will fit on the
  1087.                      Target  Drive,  fastmenu LITE  will  copy as  many
  1088.                      files  to the  Target Drive  as will fit  and then
  1089.                      prompt you to insert a new disk.  After which will
  1090.                      continue to copy the remainder of the files tagged
  1091.                      to this  disk.  fastmenu LITE  will continue  this
  1092.                      process until  all tagged  files have been copied.
  1093.                      This copy routine was added to give you a means of
  1094.                      backing  up entire directories  or groups of files
  1095.                      to floppies  without the  worry of  running out of
  1096.                      disk space on the Target Drive.
  1097.  
  1098.          (D)elete.......... Use this option to delete or remove  a file
  1099.                             or groups of files.
  1100.  
  1101.          Before using  this option,  you must  first  tag  the file  or
  1102.          group  of  files you  want to  delete,  using the  (Up/Dn) and
  1103.          (-/+/enter) keys.
  1104.  
  1105.          1>- After  tagging  the  file or  group of  files you  want to
  1106.              delete, just choose option  Delete  to start the  deletion
  1107.              process.
  1108.  
  1109.          2>- At this time you will be asked if you want to  verify each
  1110.              file before delete or continue without verifying.
  1111.          
  1112.          (R)ename.......... Use this option to rename a file.
  1113.  
  1114.          After tagging the file  that you want  to rename,  just choose
  1115.          the Rename option, you will be shown the  old file  name  in a
  1116.          edit field. Edit or change and then press the enter key.
  1117.  
  1118.          
  1119.                                        Page 16
  1120.          
  1121.          
  1122. -         
  1123.          
  1124.          
  1125.          
  1126.          
  1127.          (P)rint........... Use this  option  to send  a  copy  of  all
  1128.                             tagged files to your printer.
  1129.  
  1130.          (A)ttribute....... Selecting  this option  will  allow  you to
  1131.                             reset the attributes for the selected file.
  1132.                             After  selecting this option,  you will  be
  1133.                             presented   with  a  screen  that  has  the 
  1134.                             selected file listed along  with four icons 
  1135.                             that can be  used to  toggle the  different 
  1136.                             file attributes  on or off.  An asterisk in 
  1137.                             the box  at the  right  of each  icon means 
  1138.                             that that attribute is turned on.
  1139.  
  1140.          NOTICE !!!  Unexperienced  users  should  use  extreme caution
  1141.                      using this option.  Changing  attributes on system
  1142.                      files could cause a complete system lockup.
  1143.  
  1144.          (Z)IP Menu........ This option is explained on page 38.
  1145.  
  1146.          fastmenu LITE Phone Book/Dialer.
  1147.          ===============================:>
  1148.  
  1149.          Option             Reaction to option
  1150.          ~~~~~~             ~~~~~~~~~~~~~~~~~~
  1151.          Esc............... Use  this  option to  exit the  phone  book
  1152.                             module.
  1153.  
  1154.          (I)nsert.......... Use this  option to  insert a new record to
  1155.                             the phone book.
  1156.  
  1157.          The new record will be inserted just above the  highlight bar.
  1158.          If the  highlight  bar is  at bottom  of file,  the new record
  1159.          will be added  to the end of  the file.  If you want,  you can
  1160.          insert a new record ahead of an existing record by  moving the
  1161.          highlight bar to that record, then choosing the insert option.
  1162.  
  1163.          After choosing the insert option you will be  given a new slot
  1164.          to enter the information for this record. You can move between
  1165.          fields with the  Up/Down arrow keys.  When finished  press the
  1166.          Esc key to save it.
  1167.  
  1168.          (C)hange.......... Use this  option to  change  or  correct an
  1169.                             existing record.
  1170.  
  1171.          To change a record, just move the highlight bar  to the record
  1172.          that you  want to  change,  then choose  the (C)hange  option.
  1173.          After  selecting  this option,  you may  move  freely  between
  1174.          fields with the Up/Down arrow keys.
  1175.  
  1176.          (D)elete.......... Use  this  option  to  remove  an  existing
  1177.                             record from the phone book.
  1178.  
  1179.          To remove a record, just move the highlight bar  to the record
  1180.          that you want to remove, then choose the (D)elete option.  You
  1181.          will be prompted to verify this deletion.
  1182.  
  1183.          
  1184.          
  1185.                                        Page 17
  1186.          
  1187.          
  1188. -         
  1189.          
  1190.          
  1191.  
  1192.          
  1193.          (S)ort............ Use this option to sort all records  on any
  1194.                             field.
  1195.  
  1196.          After  choosing the  (S)ort option you will be asked to choose
  1197.          the field  that you  want to sort on.  Do this  by moving  the
  1198.          highlight  bar to  that  field  and then  press enter.   After
  1199.          selecting the field, you will be asked how  you want  to sort,
  1200.          from Memory or from Disk. Sorting from memory is a much faster
  1201.          sort method,  with this method,  all  records are  loaded into
  1202.          memory then sorted, after the sort, all records are saved back
  1203.          to disk.  Sorting records from disk can be aborted at any time
  1204.          with the Esc key but sorting takes much longer to complete.
  1205.          
  1206.          (Q)uery........... Use this  option when  you want to locate a
  1207.                             record or group  of records  from the phone
  1208.                             book database.  After selecting this option
  1209.                             you will  need to select where you want the
  1210.                             results  of  this  query  sent,  to screen,
  1211.                             printer in list form, or to mailing labels.
  1212.  
  1213.                             You  will be  presented  with a  screen  to
  1214.                             enter  search instructions.  You may search
  1215.                             on any one field or a combination of fields
  1216.  
  1217.                             Records  found  that  match   your   search
  1218.                             instructions  will be  listed to screen one
  1219.                             at a time with  options to Print,  Edit, or
  1220.                             Dial the phone number.
  1221.  
  1222.          (V)iew............ This  option  will  list  to  screen,   the
  1223.                             complete    record   that    is   currently
  1224.                             highlighted.
  1225.  
  1226.          (R)............... Selecting this option will re-dial the last
  1227.                             number that was dialed.
  1228.          
  1229.          (D)ial............ To dial  a listed  number, simply highlight
  1230.                             the  entry that  you want to  dial and then
  1231.                             press the 'D' key. At the same time pick up
  1232.                             the phone receiver and after the number has
  1233.                             been dialed just press any key to close the
  1234.                             modem port.
  1235.  
  1236.            NOTE !!   You may also dial a number simply by clicking your
  1237.                      right mouse  button on the  entry that you want to
  1238.                      be dialed.
  1239.  
  1240.            ALSO !!   If you  select this  option when the highlight bar
  1241.                      is  at bottom  of file,   a input  field  will  be 
  1242.                      presented  for you to manually enter  a number for
  1243.                      dialing.
  1244.  
  1245.          (F)iles........... This  option will  display a pick list menu
  1246.                             with the following options.
  1247.  
  1248.            
  1249.            
  1250.            
  1251.                                        Page 18
  1252.            
  1253.            
  1254. -           
  1255.            
  1256.            
  1257.            
  1258.  
  1259.            Open....... Use this  option to open  an existing phone book
  1260.                        database file.  Upon selecting this option,  you
  1261.                        will  be  presented  with  a  list  of  existing
  1262.                        database files that you may open.
  1263.  
  1264.            Create..... Use  this option to  create or  open a new phone
  1265.                        book database file.  Upon selecting this option,
  1266.                        you will be presented with a  field to enter the
  1267.                        name of the new file.
  1268.  
  1269.                NOTE !  do not include a  file extension,  fastmenu will
  1270.                        automatically append a ".GPD" file extension.
  1271.  
  1272.            Delete..... Use  this  option  if  you  want  to  delete  an
  1273.                        existing  phone  book   database  file.     Upon
  1274.                        selecting this  option, you  will  be  presented
  1275.                        with a list of existing files to select from.
  1276.  
  1277.                NOTE !  You may not delete a currently open file.
  1278.  
  1279.          Up-Dn............. These  options  represent  the up  and down
  1280.                             arrow keys.
  1281.  
  1282.          Using them will  move the highlight  bar up or down one record
  1283.          at a time.  Continuing to  hold one  of these  keys down  will
  1284.          cause the highlight bar to scan until you release the key.
  1285.  
  1286.          PgUp-PgDn......... These  options  represent  the Page  Up and
  1287.                             Page Down keys.
  1288.  
  1289.          Using them will move the highlight bar up or  down a full page
  1290.          at a time.  Continuing to  hold one  of these  keys down  will
  1291.          cause the highlight  bar to rapid  scan until you  release the
  1292.          key.
  1293.  
  1294.          NOTE !  The  phone book  module uses a file  oriented database
  1295.                  and is limited  in the number of  records only by your
  1296.                  disk size.
  1297.  
  1298.          This phone  book  module  also  provides  a macro  editor  for
  1299.          creating extended  phone  numbers.   While at  any one  of the
  1300.          phone  number fields,  you may  press the  F2 function key  to
  1301.          display  the macro  editor.  A macro is a letter in boxes [A],
  1302.          Each  macro can be  programmed to represent  up to  30 dialing
  1303.          characters.   In other words,  if you have a phone number that
  1304.          will not  fit into  the number field,  you may  create a macro
  1305.          that represents this number and then just  insert the macro at
  1306.          the phone number field.  Any number of macro's can be  used at
  1307.          the phone number field. Also,  you may  embed  a macro  into a
  1308.          macro.
  1309.  
  1310.  
  1311.  
  1312.  
  1313.  
  1314.  
  1315.  
  1316.  
  1317.                                        Page 19
  1318.  
  1319.  
  1320. -
  1321.  
  1322.  
  1323.          Calendar/Notepad Module.
  1324.          =======================:>
  1325.          Opening menu options and commands
  1326.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1327.          When you first enter the Calendar/Notepad  module you  will be
  1328.          presented  with  a  calendar  of the  current month  with  the
  1329.          current date highlighted in red.   To change the  current date 
  1330.          you can either click your mouse on  another  day or  press  or  
  1331.          click on the up or down arrow keys Icons. To change the month,  
  1332.          simply  press or  click on  the  left or  right arrow  keys or 
  1333.          icons.
  1334.  
  1335.          To enter  a note  for a  certain day  or date,  by  using  the
  1336.          up/down or  left/right arrow keys,  move the  highlight to the
  1337.          date that you  want to post  a note for  and then click on the
  1338.          "D" Icon or simply press the 'D' key on your keyboard.
  1339.  
  1340.          D>- Clicking  on  the  "D"  button  will  post  a note for the 
  1341.              current date only.
  1342.  
  1343.          W>- Clicking on the "W"  button will post a  note that will be
  1344.              displayed every Week on the selected week day.
  1345.  
  1346.          M>- Clicking on the "M"  button will post a  note that will be
  1347.              displayed every month on the selected day.
  1348.  
  1349.          Y>- Clicking on  the "Y" button will  post a note that will be
  1350.              displayed yearly on the selected day and month.
  1351.  
  1352.          N>- Clicking on the (N)otes button will  allow creating  and
  1353.              editing  general  notes  that  are not  associated to  any
  1354.              particular calendar date.
  1355.  
  1356.          At this  time you  will be  taken to the note editor where you
  1357.          can proceed to enter the text for the note. The editor options
  1358.          are as follows:
  1359.  
  1360.          F1=Save......... Use  this option  to save  your note  to disk
  1361.                           when it is completed.
  1362.  
  1363.          F2=Clear........ Using  this option  will  totally  clear  the
  1364.                           editor of any existing text.
  1365.  
  1366.          F3=Delete....... Use this option if you want to totally remove
  1367.                           a note from the system.
  1368.  
  1369.          F4=Copy......... Before using  this option you must first mark
  1370.                           a block  of text that  you want to copy.  You
  1371.                           can do this by holding your left mouse button
  1372.                           down  while dragging  your  mouse  to  a  new
  1373.                           location.  You will notice  a broken line box
  1374.                           being  drawn as  you move your  mouse cursor,
  1375.                           inside this box represents  the text that you
  1376.                           want to copy. After marking your text, simply
  1377.                           click your mouse on the F4 function key icon.
  1378.                           You may also mark a  block of text  using the
  1379.                           Shift+Arrow keys found on your numeric pad.
  1380.  
  1381.                                        
  1382.                                        
  1383.                                        Page 20
  1384.  
  1385.  
  1386. -
  1387.  
  1388.  
  1389.  
  1390.  
  1391.          F5=Paste........ After  copying a block of text to the buffer,
  1392.                           you may  paste it  to a  new location in this
  1393.                           note or to  a newly created  note  by placing
  1394.                           the cursor at the  location you want the text
  1395.                           located and  then clicking or pressing the F5
  1396.                           key or Icon.
  1397.  
  1398.          F6=Print........ Selecting  this option  will  display a small
  1399.                           menu that has the following options:
  1400.  
  1401.             A>- Print ALL.... Using this option will send the currently
  1402.                               loaded note to your printer.
  1403.  
  1404.             B>- Print Buffer. Using this option will send any text that
  1405.                               has been  copied to  the paste  buffer to
  1406.                               your printer.
  1407.  
  1408.          F7=Dial......... Selecting this option will  present  the user
  1409.                           with  a window  that can  be used to manually 
  1410.                           enter a number to send to your modem.
  1411.  
  1412.                           You may also mark any number in the currently
  1413.                           opened note, using the  block mark method and
  1414.                           then select the F7=Dial option to dial it.
  1415.  
  1416.                           NOTE !!  Modem parms for this  dialer are set
  1417.                                    through the Y=Setup Module , option
  1418.                                    (O).
  1419.  
  1420.          NOTE !     All keyboard  hot keys  that are valid  in the Disk
  1421.          Utility text file editor, are also valid in this editor.
  1422.  
  1423.          Delete Notes.. option
  1424.          ~~~~~~~~~~~~~~~~~~~~~
  1425.          This option provides a means of  removing  several notes  with
  1426.          a single pass.
  1427.  
  1428.          After selecting  this option,  you  will be  presented  with a
  1429.          scrollable tag menu  with all  notes listed.   To delete notes
  1430.          from this menu, you must tag the notes that you  want deleted.
  1431.          Tagging notes from this menu can be done either of three ways.
  1432.  
  1433.          Simply click your  left mouse  button on  the notes  you  want
  1434.          tagged, move the highlight  bar to  the note  you want  to tag
  1435.          and press the enter key, or by clicking your left mouse button
  1436.          on the up/dn arrow icons and clicking on the enter icon.
  1437.  
  1438.          After you have all notes tagged that you want deleted,  simply
  1439.          select the Delete icon from  this menu.   You will be asked to
  1440.          verify this delete.
  1441.  
  1442.          NOTE !!  This  Calendar/Notepad  module  saves  all  notes  in
  1443.                   separate  disk files  and as  a result  you may  have
  1444.                   quite a  few files  created  and on  disk at  any one
  1445.                   time.  For  this reason  I recommend  creating  a sub
  1446.                   directory on your hard drive to  store these files in.
  1447.  
  1448.                   
  1449.                                        Page 21
  1450.                   
  1451.                   
  1452. -                  
  1453.                   
  1454.  
  1455.                   
  1456.  
  1457.                   The Setup module accessed from the fastmenu LITE main
  1458.                   menu has  options for  selecting a  sub directory for
  1459.                   the Calendar/Notepad to use.
  1460.  
  1461.                   Using separate files for each note drastically speeds
  1462.                   up the  display of any note and also results in using
  1463.                   less disk  space due  to not  needing  to  maintain a
  1464.                   index file along with the data files.
  1465.  
  1466.                   All notes saved  to disk  files are  pure text  files
  1467.                   with  no  formatting   characters   embedded.    Most
  1468.                   wordprocessors  or text  file  editors  will  have no
  1469.                   problem reading these files.
  1470.  
  1471.  
  1472.  
  1473.          Available options while in the DOD/Disk Utility's File Editor.
  1474.          =============================================================:>
  1475.  
  1476.          Option              Reaction to option
  1477.          ~~~~~~              ~~~~~~~~~~~~~~~~~~
  1478.          Esc................ Use  this  option to  exit the editor.
  1479.  
  1480.          F1=Menu............ Use  this option  to  access  the  Command
  1481.                              Menu.
  1482.  
  1483.          Available options while at the Command Menu.
  1484.          ===========================================:>
  1485.  
  1486.          Option              Reaction to option
  1487.          ~~~~~~              ~~~~~~~~~~~~~~~~~~
  1488.          Esc................ Returns control to the editor.
  1489.  
  1490.          F10=Run Batch...... This option allows you  to execute  DOS or
  1491.                              batch file commands.  When you select this
  1492.                              option, all lines in the current text file
  1493.                              will be  executed at  the DOS  level as if
  1494.                              they were executed from a batch file.
  1495.  
  1496.          A>- Tab............ This  option  provides you  with  a way of
  1497.                              changing  the number of  spaces the cursor
  1498.                              moves to the  right  every time  you press
  1499.                              the Tab key.
  1500.  
  1501.           NOTE !  Pressing the Shift key plus the Tab key will move the
  1502.                   cursor in the left direction.
  1503.  
  1504.          B>- Margin......... This  option  provides  you  with a way of
  1505.                              setting  the right text margin.  The right
  1506.                              margin may be set anywhere from 10 to 255.
  1507.                              Setting the  margin to 0  will cause a 255
  1508.                              character  right  margin.   Wordwrap  will
  1509.                              occur at the right margin setting.
  1510.  
  1511.          C>- Print.....File. Selecting   this  option  will   send  the
  1512.                              currently   opened   text  file   to  your 
  1513.                              printer.
  1514.  
  1515.                                        Page 22
  1516.  
  1517.  
  1518. -
  1519.  
  1520.  
  1521.  
  1522.  
  1523.          D>- Clear...Editor. Selecting  this option will clear all text
  1524.                              from the editor.
  1525.  
  1526.            NOTE !  If you  currently have  a text  file loaded and have
  1527.                    made any changes  to this file, you will be asked if
  1528.                    you want to save changes before clearing the text.
  1529.  
  1530.          E>- Delete....Line. Selecting this option will delete the line
  1531.                              at the current cursor location.
  1532.  
  1533.            NOTE !  Every time you  delete a line with this option it is
  1534.                    saved and replaces any text that is currently in the
  1535.                    paste buffer.   You can replace  any deleted line by
  1536.                    placing  the  cursor  on  a  blank   line  and  then
  1537.                    selecting the Paste Option.
  1538.  
  1539.                    Just remember,  if you  have text saved in the paste
  1540.                    buffer,  it will  be replaced  with any  text from a
  1541.                    deleted line.
  1542.  
  1543.          F>- Insert....Line. Selecting this  option will insert a blank
  1544.                              line at the current cursor location.
  1545.  
  1546.          G>- Copy........... Selecting this option will save any marked
  1547.                              block of text to the paste buffer.
  1548.  
  1549.                              You must first mark a block of text before
  1550.                              this option can be used.
  1551.  
  1552.                              Marking  a block  of text  can be  done by
  1553.                              holding the  Shift  key down  while moving
  1554.                              the  cursor  with  the  arrow  keys  or by
  1555.                              holding  your left  mouse button  down and
  1556.                              dragging the  mouse cursor. The block will
  1557.                              be marked with dashed lines.
  1558.  
  1559.          H>- Delete......... Selecting  this  option  will  delete  any
  1560.                              marked block of text.
  1561.  
  1562.                              Any text  that has been  deleted with this
  1563.                              option will be saved to the paste buffer.
  1564.  
  1565.                              Marking  a block  of text  can be  done by
  1566.                              holding the  Shift key  down while  moving
  1567.                              the cursor  with  the  arrow  keys  or  by
  1568.                              holding  your left  mouse button  down and
  1569.                              dragging the mouse cursor.  The block will
  1570.                              be marked with dashed lines.
  1571.  
  1572.          I>- Paste.......... Selecting this option will paste any block
  1573.                              of text  that has  been saved to the paste
  1574.                              buffer. The block  of text will  be pasted
  1575.                              at the current cursor location.
  1576.  
  1577.  
  1578.  
  1579.  
  1580.  
  1581.                                        Page 23
  1582.  
  1583.  
  1584. -
  1585.  
  1586.  
  1587.  
  1588.  
  1589.          J>- Print.......... Selecting  this option will send any block
  1590.                              of text that has been  previously saved to
  1591.                              the paste  buffer to any printer connected
  1592.                              to printer port LPT1.
  1593.  
  1594.  
  1595.          Editor hot keys and commands.
  1596.          ============================:>
  1597.  
  1598.          Insert............ Toggles between insert and overtype mode.
  1599.  
  1600.                             Red cursor designates insert mode.
  1601.                             ~~~
  1602.                             White cursor designates overtype mode.
  1603.                             ~~~~~
  1604.          Tab............... Moves cursor right (tab spaces).
  1605.  
  1606.          Shift+Tab......... Moves cursor left (tab spaces).
  1607.  
  1608.          Delete............ Removes  the   character   at   the  cursor
  1609.                             location.
  1610.  
  1611.          Home.............. Moves  cursor full  left of  text at cursor
  1612.                             line.
  1613.  
  1614.          Ctrl+Home......... Moves cursor to top of screen.
  1615.  
  1616.          End............... Moves  cursor full  right of text at cursor
  1617.                             line.
  1618.  
  1619.          Ctrl+End.......... Moves cursor to bottom of screen.
  1620.  
  1621.          PgUp.............. Moves text up 25 lines each press.
  1622.  
  1623.          Ctrl+PgUp......... Moves to top of text file.
  1624.  
  1625.          PgDn.............. Moves text down 25 lines each press.
  1626.  
  1627.          Ctrl+PgDn......... Moves to bottom of text file.
  1628.  
  1629.          Up/Dn Arrows...... Moves cursor up/down on line each press.
  1630.  
  1631.          Right/Left Arrows. Moves  cursor  right/left  one  space  each
  1632.                             press.
  1633.  
  1634.          Ctrl+Y............ Delete the line at cursor location.
  1635.  
  1636.          Ctrl+N............ Insert a blank line at the cursor location.
  1637.  
  1638.  
  1639.          BLOCK OPERATIONS
  1640.          ~~~~~~~~~~~~~~~~
  1641.          Ctrl+Arrow Keys... Mark a block of text.
  1642.  
  1643.          Ctrl+Delete....... Delete a block of text.
  1644.  
  1645.          
  1646.          
  1647.                                        Page 24
  1648.          
  1649.          
  1650. -         
  1651.          
  1652.          
  1653.          
  1654.  
  1655.          Ctrl+Insert....... Insert a block of text.
  1656.  
  1657.          Pressing any key except the Esc key will save a marked block.
  1658.  
  1659.          Executing batch files (*.BAT) during screen blanking.
  1660.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1661.          If you like,  fastmenu will execute a batch file either before
  1662.          or after screen blanking.  To use these options, simply create
  1663.          the batch file and copy it to the drive and directory that the
  1664.          fastmenu files are located in.  If fastmenu finds a batch file
  1665.          with the name 'BEFORE.BAT',  it will be  executed just  before
  1666.          going into screen blanking. If a 'AFTER.BAT' file is found, it
  1667.          will be  executed after  screen blanking.   If a 'INSTEAD.BAT'
  1668.          file is found, it will be executed instead of screen blanking.
  1669.  
  1670.          These batch  files may be  used to  execute applications or do
  1671.          any system maintenance you would like done at this time.
  1672.  
  1673.          Sorting Folder Titles or The Applications listed in a Folder.
  1674.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1675.          The Sort option has been added to fastmenu LITE's main menu to
  1676.          give  you  a  means  of  sorting  the  Folder  Titles  or  the
  1677.          Applications listed in a folder  simply by selecting Sort from
  1678.          the main menu.
  1679.  
  1680.          If you  select this  Sort  option  while  viewing  the  Folder
  1681.          Titles,  you  will  be asked if  you want  to sort  the Folder
  1682.          Titles. If you answer with a 'Y' (Yes), fastmenu will sort all
  1683.          the Folder Titles in  alphabetical order  and place  all blank
  1684.          lines at the bottom of the list.
  1685.  
  1686.          If you select  this Sort option while viewing the Applications
  1687.          listed in a  Folder, you will be asked if you want to sort the
  1688.          App's in this Folder. If you answer with a 'Y' (Yes), fastmenu
  1689.          will  sort  all   Applications  listed   in  this  Folder   in
  1690.          alphabetical order and place all blank lines at  the bottom of
  1691.          the list.
  1692.          
  1693.          Entering more than one command at the Command field.
  1694.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1695.          With  fastmenu LITE  an  option  has been  added  that  allows
  1696.          entering  more than  one  command  at the  Command  field when
  1697.          adding applications to  the menu.   The following commands are
  1698.          now allowed at the Command field:
  1699.  
  1700.          * Any legal DOS command line command.
  1701.          * Any legal DOS batch file command.
  1702.          * Any legal and existing executable file name.
  1703.          * The keyboard character ^  (carat key)   Shift+6
  1704.          * The keyboard character +  (plus key)
  1705.          * The letters: DROP
  1706.  
  1707.          This option will allow doing away with those small batch files
  1708.          you sometimes  need to  execute an application with.  In other
  1709.          words,  if you have  an application  that you  want to  backup
  1710.          after every  time you  run it you  could enter  the  following
  1711.          command:
  1712.  
  1713.                                        Page 25
  1714.  
  1715.  
  1716. -
  1717.  
  1718.  
  1719.  
  1720.  
  1721.              Drive: C
  1722.          Directory: CHOICE
  1723.            Command: FIRST+^ECHO Insert backup disk.^PAUSE^COPY *.DAT A:
  1724.  
  1725.          The above  command list would first move to drive C, change to
  1726.          the CHOICE  directory,  run the executable file FIRST, at exit
  1727.          of the application  it would  prompt you  to insert  a  backup
  1728.          disk, pause for you,  copy the DAT files  to drive A, and then
  1729.          return to fastmenu LITE.
  1730.  
  1731.          Notice  the  carat  character (^) between  each command.  Also
  1732.          notice that  you can  mix DOS command  line commands and batch
  1733.          file commands.
  1734.  
  1735.          Also notice the plus character (+)  after the 'FIRST' run file
  1736.          name.  This plus character tells fastmenu LITE to also ask the
  1737.          user for a command line parameter  at execution.  You may have
  1738.          more than one plus character.  You will be asked for a command
  1739.          line parm for each plus character you have entered.
  1740.  
  1741.          NOTE !  Before this plus  character will  be active,  you must
  1742.          also switch the Parms: Y/N field to 'Y'.
  1743.  
  1744.          If you  want fastmenu LITE  to drop  to DOS  after executing a
  1745.          command, then add the '^DROP'  command at  the point  you want
  1746.          to drop to DOS.
  1747.          
  1748.          Any number  of commands  can be executed,  just make  sure you
  1749.          separate each command with the carat character (^).
  1750.  
  1751.          If you  experience a  problem of  fastmenu  dropping out after
  1752.          executing  a  batch  file,   you might  try  adding  the  CALL
  1753.          statement just  before the batch  file name.  Or even  better,
  1754.          allways include  the file extensions  when entering executable
  1755.          files.   If fastmenu LITE  detects a .BAT  extension,  it will
  1756.          automatically include the CALL statement.
  1757.  
  1758.          Example:
  1759.  
  1760.              Drive: C
  1761.          Directory: PCTOOLS
  1762.            Command: PCTOOLS^CD\BAT^CALL BATCH
  1763.  
  1764.          The  above  example  would  switch  to the  PCTOOLS directory,
  1765.          execute  the PCTOOLS  executable  file,  switch  to  the 'BAT'
  1766.          directory, execute  a batch file named BATCH, and then  return
  1767.          to fastmenu LITE.
  1768.  
  1769.          Example:
  1770.  
  1771.              Drive: C
  1772.          Directory: DOS
  1773.            Command: CHKDSK+^PAUSE
  1774.  
  1775.  
  1776.  
  1777.  
  1778.  
  1779.                                        Page 26
  1780.  
  1781.  
  1782. -
  1783.  
  1784.  
  1785.  
  1786.  
  1787.          The above  example  would first  ask you  for a  command  line
  1788.          parameter,  switch to  the DOS  directory,  execute the CHKDSK
  1789.          application with your command line parameter, pause for you to
  1790.          press enter, and then return to fastmenu LITE.
  1791.  
  1792.          The Tab Icon and how it works
  1793.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1794.          fastmenu LITE now has a new Icon  located  at the  upper right
  1795.          of your screen  'Tab'.   This  Icon is  present in  almost all
  1796.          utility modules and screens.
  1797.  
  1798.          Pressing this  'Tab' Icon at the main menu  screen will  force
  1799.          fastmenu LITE into screen blanking.
  1800.  
  1801.          Pressing this 'Tab' Icon from any other module or  screen will
  1802.          immediately return you to the main menu.
  1803.  
  1804.  
  1805.          Working with ZIP files from fastmenu LITE
  1806.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1807.          
  1808.          (Z)IP Menu
  1809.          ==========
  1810.          This option provides a complete front end menu for the
  1811.          popular archiving utilities provided by PKWare.
  1812.  
  1813.          NOTE !!!  In order for this option to operate properly, you
  1814.                    must have a copy of PKWare's archiving utilities
  1815.                    (PKZIP, PKUNZIP, PKZIPFIX, and ZIP2EXE) located
  1816.                    in a directory included in your DOS path.
  1817.  
  1818.          Zipping a list of files
  1819.          ~~~~~~~~~~~~~~~~~~~~~~~
  1820.          1>- From the files list menu, tag the files you want  included
  1821.              in the ZIP file.
  1822.          
  1823.          2>- Select the 'Zip-Up' option.
  1824.  
  1825.          3>- Enter the filename you want the ZIP file to be.
  1826.  
  1827.          4>- Edit the ZIP command switches or press enter for defaults.
  1828.  
  1829.          5>- Select the drive you want the ZIP file placed.
  1830.  
  1831.          6>- Select the directory you want the ZIP file placed.
  1832.  
  1833.          At this point,  all files  that were  tagged will be  archived
  1834.          together and copied to the drive and directory you selected.
  1835.          
  1836.  
  1837.          Un-Zipping an archived file (ZIP or EXE)
  1838.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1839.          1>- From the files list menu,  tag the archived files you want  
  1840.              to un-zip.
  1841.  
  1842.          2>- Select the Un-Zip option.
  1843.          
  1844.  
  1845.                                        Page 27
  1846.  
  1847.  
  1848. -
  1849.  
  1850.  
  1851.  
  1852.  
  1853.          NOTE !!  If you  selected the Un-Zip (tag) option, you will be
  1854.                   presented with a list  of all  files included  in the
  1855.                   archived file.   At this point you must tag all files
  1856.                   you want extracted from the archived file.
  1857.          
  1858.          3>- Edit the UN-ZIP command switches or press enter.
  1859.  
  1860.          4>- Select the drive you want the extracted files placed.
  1861.  
  1862.          5>- Select the directory you want the extracted files placed.
  1863.          
  1864.          At this point, if you  have selected  only one  ZIP file,  all
  1865.          tagged files will be extracted  to the drive and directory you 
  1866.          selected.  If you selected more than  one ZIP file, all zipped
  1867.          files selected will  be un-zipped  to the  drive and directory
  1868.          that you selected.
  1869.  
  1870.          ZIP to EXE
  1871.          ~~~~~~~~~~
  1872.          This option will create a self  extracting archived  file from
  1873.          a previously archived file.   To use this option,  simply  tag
  1874.          the ZIP file you want converted, select the ZIP to EXE option,
  1875.          edit or except the ZIP command options.
  1876.  
  1877.          View Zip
  1878.          ~~~~~~~~
  1879.          This option will display  all  file data on  any archived file
  1880.          that you have tagged.
  1881.          
  1882.          Test Zip
  1883.          ~~~~~~~~
  1884.          This option will test for any corrupt files listed in a zipped
  1885.          file.
  1886.  
  1887.          Fix Zip
  1888.          ~~~~~~~
  1889.          This option  will attempt  to fix any file found to be corrupt
  1890.          in a ZIP file.
  1891.          
  1892.          Executing applications from the Folder Titles page.
  1893.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1894.          1>- Select a blank folder title line. 
  1895.          
  1896.          2>- Answer Yes to adding another Folder Title.
  1897.          
  1898.          3>- Enter the  title or name of  the application you  want  to
  1899.              execute at the Title name field and press enter.
  1900.  
  1901.          4>- At this  point you  will be taken  to a blank Folder list.
  1902.              Select blank line number #1 or A.
  1903.  
  1904.          5>- Answer Yes to adding a application to this line.
  1905.  
  1906.          6>- At this point, you should be taken to the application edit
  1907.              screen.
  1908.  
  1909.  
  1910.  
  1911.                                        Page 28
  1912.  
  1913.  
  1914. -
  1915.  
  1916.  
  1917.  
  1918.  
  1919.          7>- At the  Title field,  enter a carat  character (^).   This
  1920.              character  is entered by  pressing your  shift key and the
  1921.              number  6 key  at  the  same  time.    fastmenu LITE  will
  1922.              automatically  execute  an application when  it encounters
  1923.              this carat character as the last character in a Title.
  1924.  
  1925.          8>- At the rest of the fields (Drive, Directory,  etc) add the
  1926.              necessary information for accessing this application.
  1927.  
  1928.          9>- After all fields have been edited, press the Save option.
  1929.              
  1930.          After  pressing  the  Save  option, this application  will  be 
  1931.          automatically  executed  for  testing.     After  exiting  the 
  1932.          application, you will be returned to the main menu of fastmenu 
  1933.          LITE and your new  application will  be ready  to run from the 
  1934.          Folder Titles page.
  1935.          
  1936.          NOTE !!  If you need  to change or edit this new Title, simply
  1937.                   click your  right mouse  button on  the Folder  Title
  1938.                   and then select Z=Edit Folder.    You may also do the 
  1939.                   same thing with the keyboard by holding the  Ctrl key  
  1940.                   down and then press the letter  associated with  this 
  1941.                   Title.
  1942.  
  1943.          Trouble Shooting.......................
  1944.          ======================================:>
  1945.          VGA Problems...
  1946.          ~~~~~~~~~~~~~~~
  1947.          fastmenu LITE has built-in VGA detection that will  prevent it
  1948.          from being  run on  any system that is not equipped with a VGA
  1949.          color card and monitor.   New VGA Color cards  are coming  out  
  1950.          every  day from  new and existing  manufacturers, due to this, 
  1951.          you may  experience some problems getting fastmenu LITE to run 
  1952.          on these new cards.  If you know that you  do have a  full VGA  
  1953.          system and  yet you  still cannot get fastmenu LITE to run,  a 
  1954.          way has been  built-in  to fastmenu LITE  to bypass  this  VGA 
  1955.          detection. Create a file named:  SKIP-VGA.DAT
  1956.  
  1957.          This file should have only one line in it and that line should
  1958.          read: VGA     You may use any text editor or  wordprocessor to
  1959.          create this file.
  1960.  
  1961.          This SKIP-VGA.DAT file should be copied to the same  directory
  1962.          that you have installed fastmenu LITE to.
  1963.  
  1964.          Input Runtime Module Path:.....
  1965.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1966.          fastmenu LITE uses a runtime module  at  various  times during
  1967.          operation and must be able to locate it.
  1968.  
  1969.          This runtime module is in a file named:  BRUN45.EXE.
  1970.          For proper operation  you must have a  path statement  in your
  1971.          AUTOEXEC.BAT file telling DOS where to locate this file.  Also
  1972.          you should have a path statement to the ROOT directory and the
  1973.          directory that  your DOS files are located in.
  1974.          
  1975.  
  1976.  
  1977.                                        Page 29
  1978.  
  1979.  
  1980. -
  1981.  
  1982.  
  1983.  
  1984.  
  1985.          An example of the minimum path statement would be:
  1986.          
  1987.          PATH=C:\;C:\DOS;C:\FMLITE
  1988.  
  1989.          fastmenu LITE drops out after executing a batch file...
  1990.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1991.          With this  version,  you are  required  to  include  the  file
  1992.          extension at  the Command  field  when executing  batch files.
  1993.          If  you  are  having  this  problem,   simply  enter  the Edit 
  1994.          Applications  module  for the Folder that this  application is 
  1995.          listed on, select to Add/Edit, then select the application you 
  1996.          are  having problems with, move the cursor to the the  Command 
  1997.          field and add '.BAT' to the end of the executable filename.
  1998.  
  1999.          Can't find C:\GOLD\FAST1234.BAT file......
  2000.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2001.          This prompt may show up at exit time from fastmenu LITE if you
  2002.          are running a DOS version other that MS-DOS or PC-DOS.
  2003.          To  correct  this  problem,    simply  create  a  file  named: 
  2004.          "FAST1234.IFO". Place this file  into the directory  that  you
  2005.          installed fastmenu LITE to.   This file does not  have to have
  2006.          any information in it and can be of 0 size.  
  2007.          
  2008.          This version of fastmenu LITE was written and  compiled  using
  2009.          MicroSoft QuickBASIC v4.5.
  2010.          
  2011.          About 30% of the code is in QuickBASIC  including  all  of the
  2012.          VGA screens and windows.    The rest of the code is  comprised
  2013.          of super fast compiled assembly language routines.
  2014.  
  2015.          New Version and Update Policy
  2016.          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2017.          Registered users  of fastmenu LITE  can obtain  a copy  of any
  2018.          updated version for one year from the date of registration  by
  2019.          sending $16.00 to the below address. New updates are  sent out
  2020.          on HD 3 1/2 in disks. A full manual (on disk) is included with 
  2021.          each update.
  2022.  
  2023.          Registered  users  over one  year from  registration  date can
  2024.          obtain a new updated version by sending $34.00. With this type
  2025.          of update,  you will receive a copy of the latest version,  on
  2026.          HD 3 1/2 in disks, a full printed manual, and one full year of 
  2027.          support.
  2028.  
  2029.  
  2030.  
  2031.  
  2032.  
  2033.  
  2034.  
  2035.  
  2036.  
  2037.  
  2038.  
  2039.  
  2040.  
  2041.  
  2042.  
  2043.                                        Page 30
  2044.  
  2045.  
  2046. -
  2047.  
  2048.  
  2049.  
  2050.  
  2051.  
  2052.  
  2053.  
  2054.  
  2055.  
  2056.  
  2057.  
  2058.  
  2059.  
  2060.  
  2061.          DISCLAIMER
  2062.               Users must  accept  this  disclaimer  of  warranty:  This
  2063.          application   supplied  as  is.    The  author  disclaims  all
  2064.          warranties,   expressed   or   implied,   including,   without
  2065.          limitation, the warranties of  merchantability  and of fitness
  2066.          for any purpose. The author  assumes no liability for damages,
  2067.          direct or consequential, which may result from the use of this
  2068.          manual or the application it describes.  jwh: SoftWare
  2069.                                                   6947 Haggerty Road    
  2070.                                                   Hillsboro,  Ohio  45133 
  2071.                                                   Phone (513) 393-2402
  2072.  
  2073.              
  2074.              
  2075.              
  2076.              
  2077.              
  2078.              fastmenu LITE is a product and copyright (c) 1994 by:
  2079.                       jwh: SoftWare.   All rights reserved.
  2080.              
  2081.              MicroSoft QuickBASIC is a product and copyright (c) by:
  2082.                           The Microsoft Corporation.
  2083.              
  2084.              PKZIP, PKUNZIP, PKZIPFIX, and ZIP2EXE are all products and
  2085.              copyright (c) by: PKWARE, Inc.  All rights reserved.
  2086.  
  2087.  
  2088.  
  2089.  
  2090.  
  2091.  
  2092.  
  2093.  
  2094.  
  2095.  
  2096.  
  2097.  
  2098.  
  2099.  
  2100.  
  2101.  
  2102.  
  2103.  
  2104.  
  2105.  
  2106.  
  2107.  
  2108.  
  2109.                                        Page 31
  2110.  
  2111.  
  2112. -
  2113.